PERANCANGAN ALAT PENDETEKSI LEVEL BAHAYA KEBISINGAN AREA KERJA BERBASIS ARDIUNO UNO

Authors

  • Dewi Pujiant
  • A. Asni B.
  • Mayda Waruni Kasrani

DOI:

https://doi.org/10.54757/fs.v13i2.149

Keywords:

noise hazard, arduino nano, hearing protection

Abstract

Noise hazards can occur in almost all work areas and can be sourced from various work equipment. The sound category included in the noise hazard is sound with an intensity of more than 70 dB. In areas where sound has an intensity of more than 70 dB, it is recommended to use hearing protection devices such as ear plugs, while if the sound intensity is more than 80 dB, you must use ear muffs. The work area is usually only given a warning board to use hearing protection equipment, but there is no noise hazard detection device that can give real-time warnings. The purpose of this study is to design a tool that can detect and measure noise levels in a work area. This tool uses the fc-04 tool as a noise level reader which then gives a signal to the Arduino Uno microcontroller which will classify the sound level into 3 levels, namely low, medium and high which are displayed on the LCD board and use 3 LED (green, yellow and red) as an indicator of the level of noise hazard and a warning to use hearing protection.

References

R. D. Aprilia, A. Harijanto, and S. Subiki, “Rancang Bangun Alat Peraga Fisika Efek Doppler Menggunakan Modul Sensor Suara dan Arduino,” J. Fis. Unand, vol. 11, no. 2, pp. 139–145, 2022, [Online]. Available: http://jfu.fmipa.unand.ac.id/index.php/jfu/article/view/796%0Ahttp://jfu.fmipa.unand.ac.id/index.php/jfu/article/download/796/634

M. Rosmolen, “Kebisingan Lingkungan Kerja,” Geonoise.com. 2018. [Online]. Available: https://www.konsultasi-akustik.com/kebisingan-lingkungan-kerja/

S. T. Ratnasari, “Analisis Risiko Keselamatan Kerja pada Proses Pengeboran Panas Bumi Rig Darat,” Fkmui, pp. 62–64, 2009.

J. T. E. Uniba, “Menggunakan Arduino Nano,” vol. 3, no. 2, 2019.

M. Hishomudin, “Rancang Bangun Alat Ukur Tingkat Bunyi ( Sound Level Meter) dengan Sensor Microphone Berbasis Arduino dan Android,” pp. 1–103, 2016.

P. Studi, T. Elektro, F. Teknik, and U. I. Malang, “Alat Pendeteksi Kebisingan Di Ruang Pasien Berbasis Fuzzy Logic,” 2022.

S. Deswilan and H. Harmadi, “Rancang Bangun Alat Pendeteksi Kebisingan Berbasis Sensor Serat Optik,” J. Fis. Unand, vol. 8, no. 3, pp. 245–251, 2019, doi: 10.25077/jfu.8.3.245-251.2019.

K. F. A. Widyadana, “Perancangan Sistem Kebisingan Suara Dengan Sound Sensor Mic Berbasis Arduino,” Researchgate.Net, no. April, 2021, [Online]. Available: https://www.researchgate.net/profile/Raditya-Pratama-6/publication/351153535_Perancangan_Sistem_Kebisingan_Suara_Dengan_Sound_Sensor_Mic_Berbasis_Arduino/links/608a9aac92851c490fa3ede2/Perancangan-Sistem-Kebisingan-Suara-Dengan-Sound-Sensor-Mic-Berbasis-A

A. D. Hidayat, B. Sudibya, and C. B. Waluyo, “Pendeteksi Tingkat Kebisingan berbasis Internet of Things sebagai Media Kontrol Kenyamanan Ruangan Perpustakaan,” Avitec, vol. 1, no. 1, pp. 99–109, 2019, doi: 10.28989/avitec.v1i1.497.

A. Safriadi, A Asni B., and S. Rahman, A, F, “Perancangan Sistem Kontroler Alat Elektronik Rumah Tangga Berbasis Mikrokontroler Arduino Uno Dengan Perintah Suara.,” J. JTE UNIBA, vol. 3, no. 2, pp. 54–59, 2019.

A. Suryanto, “Pemetaan Risiko Kebisingan Dan Analisis Faktor Yang Mempegaruhi Dampak Kebisingan Pada Pekerja Di PT.X Jawa Timur,” J. Chem. Inf. Model., vol. 53, no. 9, pp. 1689–1699, 2018.

“Alat Pendeteksi Kebisingan Di Ruang Pasien Berbasis Fuzzy Logic _ syihabuddin _ Science Electro.”

R. S. Rinaldi, Y. R. Lase, and M. K. A. Rosa, “Perancangan Sistem Otomatisasi Penyalaan Lampu, Kipas Angin, dan Proyektor Dalam Ruang Kelas,” J. Amplif. J. Ilm. Bid. Tek. Elektro Dan Komput., vol. 11, no. 2, pp. 1–7, 2021, doi: 10.33369/jamplifier.v11i2.18317.

M. W. Kasrani, A. Asni B, and A. S. Putra, “Perancangan Sistem Pengendalian Kecerahan Lampu Utama Pada Mobil Berbasis Arduino Uno,” J. Tek. Elektro Uniba (JTE UNIBA), vol. 5, no. 1, pp. 104–108, 2020, doi: 10.36277/jteuniba.v5i1.88.

A. Asni B., M. W. Kasrani, and A. A. Prayitno, “Perancangan Sistem Monitoring Jumlah Slot Kosong Pada Gedung Parkir 3 Lantai Berbasis Mikrokontroller,” J. Tek. Elektro Uniba (JTE UNIBA), vol. 5, no. 2, pp. 149–150, 2021, doi: 10.36277/jteuniba.v5i2.101.

Downloads

Published

2022-11-28

How to Cite

[1]
D. Pujiant, A. Asni B., and M. W. Kasrani, “PERANCANGAN ALAT PENDETEKSI LEVEL BAHAYA KEBISINGAN AREA KERJA BERBASIS ARDIUNO UNO”, Fs, vol. 12, no. 2, Nov. 2022.

Issue

Section

Articles