RANCANG BANGUN SISTEM MONITORING THERMAL OVERLOAD RELAY PADA MOTOR INDUKSI 3 PHASA

Authors

  • Mispan Mispan
  • Ahamd Antares Adam
  • Nurhani Amin
  • Yulius S. Pirade

DOI:

https://doi.org/10.54757/fs.v14i2.326

Keywords:

3 phase induction motor, monitoring of 3 phase induction motor, monitoring using Blynk

Abstract

Thermal Overload Relay (TOR) is a tool that works based on heat (temperature) where the flowing current will be converted into heat to affect the bimetal. The length of trip time on the Thermal Overload Relay (TOR) varies depending on the setting value and the magnitude of the load current flowing. This prompted researchers to conduct trials and analyze Thermal Overload Relay (TOR). The research to be carried out here is to conduct a Thermal Overload Relay (TOR) test by adjusting the setting value and giving it more load, then analyzing whether the setting value works according to the setting value. When the motor is loaded, by holding the motor shaft, nothing happens or does not work on thermal overload, because the setting on the thermal overload relay is 2.5 A while the current obtained when the motor shaft is held is 0.40 A

References

Prih Sumardjati, S. Yahya, and A. Mashar, TEKNIK PEMANFAATAN TENAGA LISTIK JILID 3, vol. 3, no. April. 2008.

Y. Efendi, “Internet Of Things (Iot) Sistem Pengendalian Lampu Menggunakan Raspberry Pi Berbasis Mobile,” J. Ilm. Ilmu Komput., vol. 4, no. 2, pp. 21–27, 2018, doi: 10.35329/jiik.v4i2.41.

A. Prafanto, E. Budiman, P. P. Widagdo, G. M. Putra, and R. Wardhana, “Pendeteksi Kehadiran menggunakan ESP32 untuk Sistem Pengunci Pintu Otomatis,” JTT (Jurnal Teknol. Ter., vol. 7, no. 1, p. 37, 2021, doi: 10.31884/jtt.v7i1.318.

F. Habibi, Nur, S. Setiawidayat, and M. Mukhsim, “Alat Monitoring Pemakaian Energi Listrik Berbasis Android Menggunakan Modul PZEM-004T,” Pros. Semin. Nas. Teknol. Elektro Terap. 2017, vol. 01, no. 01, pp. 157–162, 2017, [Online]. Available:https://prosiding.polinema.ac.id/sngbr/index.php/sntet/article/view/81/77

Ashari1, S., Made, I., Sukmadana2, B., Bagus, I., & Citarsa3, F. (2015). Rancang Bangun Sistem Monitoring Dan Pengaman Motor Induksi Tiga Phasa Berbasis Mikrokontroler Atmega 8535 Design Of Three Phase Induction Motor Monitoring And Safety System Based On Microcontroller ATMega 8535 (Vol. 2, Issue 2).

Downloads

Published

2024-01-06

How to Cite

[1]
M. Mispan, A. A. Adam, N. Amin, and Y. S. Pirade, “RANCANG BANGUN SISTEM MONITORING THERMAL OVERLOAD RELAY PADA MOTOR INDUKSI 3 PHASA”, Fs, vol. 13, no. 2, Jan. 2024.

Issue

Section

Articles