PEMODELAN SOLAR TRACKER DENGAN PENGENDALI PI, PD, DAN PID MENGGUNAKAN MATLAB-SIMULINK DENGAN BEBAN BATERAI
DOI:
https://doi.org/10.54757/fs.v14i1.375Keywords:
solar tracker, photovoltaic, controller, battery, Matlab-simulinkAbstract
A solar tracker is a photovoltaic (PV) system support tool aimed at optimizing solar energy absorption by directing solar cells to follow the movement of the sun.In this research, a solar tracker for PV with battery load model was created using MATLAB-Simulink with each controller, namely Proportional Integral (PI), Proportional Derivative (PD) and Proportional Integral Derivative (PID) and the simulation results were compared. The simulation results show that the PID controller is the controller with the most optimal results because all set point values entered in the output remain the same and the overshoot value is also low, the PD controller is the controller that produces high errors and also overshot reaching 120 V, and the PI controller is the controller that the results are closest to a PID controller where the resulting overshoot value is only around 20%.
References
A. Hakim, Perancangan dan Simulasi Penerapan Pengendali PID Pada Sistem Kendali Tegangan Keluaran Generator Pesawat N291 di PT. Dirgantara Indonesia, Universitas Negeri Malang, 2018.
K. Ogata, Teknik Kontrol Automatik (Sistem Pengaturan). Jakarta: Erlangga., 1997.
T.D. Hakim dan Muhammad Sukma, “Rancang Bangun Dual-Axis Solar Tracker Mengunakan Mikrokontroler Arduiono Mega 2560”, Jurnal Teknik Elektro Universitas Krisnadwipayana, Vol 10 No. 2 ,2022.
J. Sihite, Studi Pengaruh Sudut Kemiringan Panel Surya Terhadap Intensitas Cahaya Panel Surya , Universitas HKBP Nommensen P.Siantar , 2021.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Putri Maharani, Ahmad Antares Adam, Baso Mukhlis, Yusnaini Arifin, Nurhani Amin, Mardiansyah Mardiansyah
This work is licensed under a Creative Commons Attribution 4.0 International License.
This work is licensed under a 
